|
|
|
| Bosch Straight Router Bit, 1/8" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$10.00 - $14.00
from 2 stores
|
|
| Bosch Straight Router Bit, 5/16" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$14.00 - $17.00
from 1 store
|
|
| Bosch Rabbeting Router Bit, 3/8" |
|
Micrograin carbide tip designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. For fast, smooth, rabbeting cuts without use of router guide.
|
|
$17.00 - $25.00
from 3 stores
|
|
| Bosch Straight Router Bit, 1/4" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$10.00 - $17.00
from 2 stores
|
|
| Bosch Straight Router Bit, 3/8" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$11.00 - $15.00
from 2 stores
|
|
| Bosch Straight Router Bit, 7/16" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$14.00 - $20.00
from 1 store
|
|
| Bosch Pilot Panel Drill Bit, 1/4" |
|
Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard plastics. Single flute; Drill thru pilot for guiding on templet or framing after panel has been mounted. For windows and door cutouts in abrasive insulation material ...
More
|
|
$8.43 - $10.27
from 1 store
|
|
| Bosch Laminate Trim Router Bit, 1/4" |
|
Micrograin carbide tip designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard plastics. Ball bearing pilot. Provides 10 degree flus ...
More
|
|
$13.00 - $15.00
from 1 store
|
|
| Bosch Straight Router Bit, 11/16" |
|
Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard p ...
More
|
|
$15.00 - $20.00
from 1 store
|
|
| Bosch Flush Trimming Router Bit, 1/2" |
|
Micrograin carbide tip designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. For fast, smooth, accurate trim cuts. Shielded, compact ball bearing pilot.
|
|
$11.00 - $16.00
from 1 store
|
|
| Bosch Accessories Router Bits Arbors |
|
Arbor Diameter 516 Bearing Diameter 78 For Use With 2wing slotting cutters Item Description Arbor for 2Wing Slot Cutter Length 258 Part Number 82810 Shank Diameter 14 Used on Part No 85517M 85520M 92837
|
|
$18.00 - $26.00
from 2 stores
|
|
| Bosch V-Grooving Router Bit, 9/16" |
|
Router bits made from high speed steel are manfactured from one piece of steel and are designed to maximize value for bits used with softer material. Used with long grain woods or plastics.For door front grooving, lettering, and sign work.
|
|
$14.00 - $20.00
from 1 store
|
|
| Bosch 85242M Carbide Tipped Double Flute Straight Bit |
|
Bosch 85242M Carbide Tipped Double Flute Straight Bit. Features Router bits with tungsten carbide cutting edges or solid carbide bits are especially suitable for use with tough abrasive materials and last several times longer than HSS bits. Use for different groove and profile cuts in solid wood glu ...
More
|
|
$15.00 - $17.00
from 2 stores
|
|
| Beading Router Bit, 1/4" |
|
Micrograin carbide tip designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard plastics. For decorative edge cuts; Beading depth 1/1 ...
More
|
|
$10.00 - $21.00
from 3 stores
|
|
