|
|
|
| Porter Cable 59381 Hinge Butt Template Kit |
|
Hinge butt template kit; guides router for professional results and allows perfect matching Permits mortising door jamb from 78-inches to 84-inches; adjust for cutting 3-inch to 6-inch mortises Cast-aluminum and steel construction Includes mortising bit, template guide, lock nut, carrying case, wren ...
More
|
|
$193.00 - $250.00
from 6 stores
|
|
| Porter Cable 5,500 Watt Portable Generator #BSV550 W |
|
5,500-watt portable generator powered by Briggs & Stratton Vanguard commercial power engine Advanced alternator design; full circuit breaker protection for safety Mounted rubber isolators for minimal vibration 7-gallon fuel tank for up to 10.4 hours of run time at half load; 7 hours at full load Mea ...
More
|
|
$840.00 - $870.00
from 3 stores
|
|
| Porter Cable 9118 #126 Porta Plane Door Planer |
|
Come to our store for further discounts on a Brand New Porter Cable Door Planer 7 Amps 22,000 RPM Capacities, 2-13/32" max width 3/32" max depth Bevel adjustment -15 to + 45 Replaceable non-marking STAINLESS shoes Includes: Case & CARBIDE spiral cutter
|
|
$449.00 - $450.00
from 2 stores
|
|
| Porter Cable - Cable Factory - Reconditioned 1 3/4 Peak HP Router 690LR |
|
Features 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Under tab ...
More
|
|
$107.00 - $152.00
from 7 stores
|
|
| Porter Cable 513 Lock Mortiser |
|
Brand New Porter Cable Lock Mortiser 10 Amps, AC only 1-1/2 HP, 23,000 RPM Quick, accurate cutting of mortises for box locks Cuts mortises up to 7" long, 1-1/4" wide, 4-3/4" deep. automatically centers on door Adjustable height rod, 3/4" & 1" mortising bits Includes:#690 Motor #43703 3/4"-17/32 Flut ...
More
|
|
$969.00 - $1,104.00
from 3 stores
|
|
| Porter Cable CFBN125B Brad Nailer/Compressor Combo Kit |
|
Features: Porter-Cable CFBN125B Brad Nailer/Compressor Combo Kit COMPRESSOR 150 Max PSI allows users to drive more nails than a traditional 135 Max PSI comprssor. 6 gallon tank allows users to drive a large quantity of nails on a single tank charge. 2.6 SCFM at 90 PSI allows for quick compressor rec ...
More
|
|
$190.00 - $266.00
from 3 stores
|
|
| Porter Cable - Cable CFFC350C Clipped Head Framer Combo Kit |
|
Clipped-Head Framing Nailer features tool-free adjustable exahust, depth adjustment, selectable trigger and non-marring tip. 1.6 (running) HP, 4 Gallon Oil-Free Pancake Compressor Two-pole, 3,450 RPM induction motor for maximum air delivery 5.3 SCFM @ 90 PSI FC350A, 3-1/2" Clipped-Head Framing Naile ...
More
|
|
$402.00 - $420.00
from 3 stores
|
|
| Porter Cable 7800 Drywall Sander With Dust Collection |
|
Features: Porter Cable 7800 Drywall Sander with Dust Collection Variable-speed dial (1,400 - 2,000 RPM) Built in dust collection hose 1 1/4" vacuum hose is 13' long so that large areas can be sanded in one set up Vacuum not included Specifications: Porter Cable 7800 Drywall Sander with Dust Collecti ...
More
|
|
$459.00 - $459.00
from 4 stores
|
|
| Porter Cable 2" Flooring Cleat Nailer FCN200 |
|
Features Drives from 1 1/2" to 2" L shape cleat nails, Strong, lightweight, die-cast aluminum construction, Non-marring base is designed to allow driving of fastener close to wall, Better balance for stability - tool sits upright for smoother floor installation, Rear-load gravity feed magazine with ...
More
|
|
$435.00 - $607.00
from 6 stores
|
|
| Porter Cable 7519 Speedmatic 3 1/4 Peak Hp Router |
|
Features: Porter Cable 7519 Speedmatic 3 1/4 Peak HP Router 15 Amps, AC only 21,000 RPM with soft start 1/2" collet Auto-release collet system ends "frozen" bits Unique design pus bottom bearing closer to work for minimum bit run-out and vibration Precision machined aluminum motor housing & base 100 ...
More
|
|
$319.00 - $360.00
from 4 stores
|
|
| Porter Cable - Cable 135 PSI, 60 Gal. Oil - Lube Stationary Compressor C7510 |
|
Features 7 Peak HP, 3 HP Running, 135 PSI pressure for longer tool run time, 89 dBA, Single stage, oil-lubricated pump designed with aluminum body and head for best cooling and cast iron cylinder sleeves for best wear, Pump contains automotive style pistons, rings, and connecting rod, and sight glas ...
More
|
|
$645.00 - $810.00
from 3 stores
|
|
