|
|
|
| Senco SLS18 Proseries 18 Gauge Stapler 1/4" Crown (1W0001N) |
|
Senco SLS18 ProSeries 18 Gauge Stapler - 1/4" Crown (1W0001N) The versatile SLS18 finish stapler weighs just 2.9 lbsbut can drive 1/2" to 1-1/2" staples into hard woods.With either a dual or restrictive trigger you can choosebetween high productivity or precisionplacement making it the ideal staple ...
More
|
|
$120.00 - $130.00
from 4 stores
|
|
| Senco Sks "N" Wire 1 1/2" 16Ga Stapler |
|
Drives 7/8" to 1-1/2" leg 16 gauge 7/16 crown Senco N series staples Rear exhaust ,Keeps oil off fabric Requires no lubrication for added convenience. Designed with only 2 moving o-rings for increased reliability. For cabinet and furniture assembly, door and window casings, trim and moldings, Manufa ...
More
|
|
$329.00 - $380.00
from 2 stores
|
|
| Senco SNS45XP Construction Stapler |
|
For sheathing, subflooring, decking, fascia & soffit, lathing and more Versatile stapler has the best power-to-weight ratio in its class Designed with 30% fewer parts & 15% more power than the competition Drives 16 gauge staples 1 in. to 2 in. Adjustable depth-of-drive, Manufacturer: Senco
|
|
$293.00 - $299.00
from 1 store
|
|
| Senco Fastening Systems No.N21BAB 10,000PK 2" Galv Staple |
|
10,000 Pack, 7/16" Crown x 2' Galvanized Staples, Fits Senco SKS-N, SNS40, SNS45, SNS50, Use For Sheathing, Subflooring, Roof Decking, Subcomponents Lathing, Window Units Cedar Shingles, Furring Fascia & Soffits, Vinyl Siding.
|
|
$48.00 - $63.00
from 2 stores
|
|
| Senco Fastening Systems No.N19BRB 10,000PK 1-3/4" Staple |
|
10,000 Pack, 7/16" Crown x 1-3/4" Bright Basic Staples, Fits Senco SKS-N, SNS40, SNS45, SNS50, Use For Sheathing, Subflooring, Roof Decking, Subcomponents Lathing, Window Units Cedar Shingles, Furring Fascia & Soffits, Vinyl Siding.
|
|
$39.00 - $45.00
from 1 store
|
|
| SENCO SLS25XP-L Stapler, Sequential |
|
The ergonomically designed SLS25XP stapler from SENCO® is powerful and versatile. This new-generation stapler weighs just 2.7 lbs, yet has the power to drive 1-1/2" staples into hard woods. Two models drive 1/4" and 3/8" crown staples in lengths from 3/8" ? 1-1/2". New 5-Year Warranty. PROJECTS: ...
More
|
|
$180.00 - $204.00
from 2 stores
|
|
| Senco Products SNS 45XP 16 gauge Stapler with Case |
|
The lightweight SNS45XP Stapler is built to last. With 30% fewer parts and 15% more power than comparable tools, it's one stapler you won't want to put down. Weighing just 5.1 pounds, it has the best power-to-weight ratio in its class. Plus, it drives staples at a rate of 15 cycles per second. New 5 ...
More
|
|
$305.00 - $310.00
from 2 stores
|
|
| Senco& Accuset Crown Staple |
|
1/4" crown 18 gauge Fits Accuset utility finish stapler A150LS (Ace No. 2103737) Use for crafts, toys, casebacks, drawer building, cabinets, picture frames, soffits, fascia Galvanized
|
|
$7.99 - $7.99
from 1 store
|
|
| Senco SKS M12-M17 18 Gauge Stapler |
|
The SENCO SKS is available for use in a wide variety of woodworking applications. It is offered in a series of models that drive 2 different gauges and 3 different crown widths in lengths ranging from 7/8" to 1-1/2". It is the dependable, virtually maintenance-free stapler you can count on for the p ...
More
|
|
$299.00 - $364.00
from 2 stores
|
|
|
| SENCO SLS20-K Stapler, Sequential |
|
The ergonomically designed SLS20 increases quality and productivity in a wide variety of applications. The SLS20XP stapler from SENCO is not only lightweight, it's powerful. This popular stapler weighs just 2.5 lb. New 5-Year Warranty. Refer to staple chart below! PROJECTS: Cabinets Casebac ...
More
|
|
$209.00 - $260.00
from 2 stores
|
|
|
| SENCO SLS20-R Stapler, Sequential |
|
The ergonomically designed SLS20 increases quality and productivity in a wide variety of applications. The SLS20XP stapler from SENCO is not only lightweight, it's powerful. This popular stapler weighs just 2.5 lb. New 5-Year Warranty. Refer to staple chart below! PROJECTS: Cabinets Casebac ...
More
|
|
$233.00 - $260.00
from 2 stores
|
|
|
| SENCO SFW10XP B Wire, 3/8" to 1/2" leg |
|
This durable, fine-wire SENCO air powered tool is designed for professional performance. Various SFW10XP models drive staples ranging in length from 5/32" (5 mm) to 5/8" (16 mm), and have excellent features for user comfort, resulting in greater production output. Applications: Upholstering operatio ...
More
|
|
$163.00 - $216.00
from 2 stores
|
|
| Senco& Finish Stapler (1W002N) |
|
Uses 1/2" to 1-1/2" 18 gauge staples For assembling drawers, cabinet frame assembly, upholstery spring attachment, underlayment sheathing, molding/trim, pre-finished gypsum, vinyl and aluminum siding, general woodworking, Latticework, bedspring attachment, case backs, paneling, soffit Use Senco fast ...
More
|
|
$110.00 - $115.00
from 2 stores
|
|
|
SNS 50 XP 16 gauge Stapler
|
|
The SENCO SNS50XP Stapler has all the power and speed needed for the toughest 16-Gauge staple applications. Designed with today's harder woods and lam...
More
|
|
$494.00
at
|
|
|
SQS 55 15 Gauge Stapler
|
|
The SENCO SQS55XP Stapler has all the power and speed needed for the toughest 15-Gauge staple framing and sheathing applications. Designed with today'...
More
|
|
$531.00
at
|
|
