|
|
|
| Coil Spring Compressor Set |
|
Features: - Set of 2 Spring Compressor- Drop Forged, Heat Treated Steel - Chrome Plated Compressor Jaws- Precision Machined Steel Bolts- Permits Quick And Safe Removal Or Installation Of Springs - Extend From Approx. 3" to Approx. 9"- Adjustable to Fit Most Strut SizeMSRP: $39.99
|
|
$10.00 - $16.00
from 2 stores
|
|
| Magnetic Bit Holder |
|
German ingenuity figured out how to speed up fastening. This " Magnetic Bit Holder features two magnets: one to hold your bits; the second, located on the face of the adjustable collar, holds screws in place up to 5" in length for fast one-handed driving. 2" long. Made in Germany. Bit not included.
|
|
$1.15 - $16.00
from 3 stores
|
|
| Pilot Bearing Puller |
|
For removing pilot bearings and brushings from flywheel during clutch replacement. Heavy duty puller includes fingers with a 1-1/2" length for extra deep reach. Positive engagement design locks tips of fingers behind bearing while expanding against inner diameter to grasp bearing firmly. Plated s ...
More
|
|
$18.00 - $45.00
from 2 stores
|
|
| Ridgid 14" Aluminum Pipe Wrench |
|
The RIDGID 14 In. Aluminum Wrench is 40 % lighter than the RIDGID Heavy-Duty Wrenches. The jaws & all other parts are identical to the RIDGID Heavy Duty Wrench. Tools and Hardware
|
|
$14.00 - $53.00
from 5 stores
|
|
| 30" Bolt Cutter |
|
Drop Forged Heavy duty Rubber Coated tubular Handle Cuts Through Bolt Or Lock Like Butter, Manufacturer: Austin Bazaar Affiliate
|
|
$11.00 - $27.00
from 2 stores
|
|
| 40 Pc Sae Tap And Die Set |
|
Quality tool steel, coarse and fine set. Set also Includes: 1 Long Handle Adjustable Tap Wrench, 1 "T" Handle Tap Wrench, And 1 Die Handle, 1 Screw Driver, 1 Screw Pitch Gauge, Comes complete with plastic storage case., Weight: 4 lbs., Manufacturer: TRADEMARK GLOBAL
|
|
$16.00 - $30.00
from 3 stores
|
|
| 5 Lb 9 Pc Dent Puller Set |
|
Construction: Heat Treated Steel Dent puller is a multi-purpose tool with a thousand uses on auto body repair problems Slide Weight: 5 lbs., Weight: 8 lbs., Manufacturer: CVF Supply
|
|
$13.00 - $18.00
from 2 stores
|
|
| 1/2" Drive Air Ratchet |
|
The ratchet has a compact Head for getting into tight areas w/ easy reverse. Hardened gears. 10 to 45 ft-lbs. working torque, 125 ft-lb. Maximum torque. 150 RPM no load speed. 4 CFM@ 90 PSI, Weight: 4 lbs., Manufacturer: CVF Supply
|
|
$20.00 - $41.00
from 2 stores
|
|
| 40pc Tap & Die Set |
|
Heat treated high carbon steel Adjustable T tap wrench, "T" handle die wrench, mandrel with handle 1/8" mini flat screwdriver, Thread gauge, Plastic storage case Includes: 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8 N ...
More
|
|
$10.00 - $104.00
from 2 stores
|
|
| Pit Bull 4" Drill Press Vise |
|
Durable cast iron construction, powerful, serrated steel jaws Cold rolled steel screws and swivel crank handle drops out of way Slotted base positions easing on drill press table Throat opening: 4" Jaw width: 4"
|
|
$7.00 - $30.00
from 3 stores
|
|
| 7 Pc Auto Body Repair Tools Kit |
|
7 pc Auto Body Repair Tools Kit. Kit includes 3 hammers (standard bumping, reverse-curve and pick-and-finish) Plus 4 dollies (curved, utility, double-end hand and shrinking). Precision-ground drop-forged steel with polished surfaces and wood handles.
|
|
$20.00 - $20.00
from 2 stores
|
|
| Outside Micrometer |
|
0-1" Outside Micrometer : For accurate 0.01" measurements up to 1", simply place item between Micrometer anvil and spindle and tighten - add barrel reading to thimble reading for total thickness: Built in standard force, fixed tension adjustment knob for deformable material and lever lock for retain ...
More
|
|
$5.00 - $16.00
from 2 stores
|
|
