|
|
|
| Starrett 6" Combination Square |
|
This Starrett combination square consists of a machine divided, hardened, and tempered steel blade on which is mounted an adjustable square head. The combination square head is made of forged and hardened steel and are not to be confused with cheap imiatation plastic or die cast heads on the marke ...
More
|
|
$68.00 - $68.00
from 2 stores
|
|
| Starrett 6" Dial Caliper with Fraction Graduations |
|
With the ability to provide quick, accurate measurement of O.D., I.D. and depth, this dial caliper is one of the most versatile measuring tools available. Perfect for woodworkers as it shows measurements as fractions on a yellow outer scales with 1/64th inch graduations, and decimal measurements on ...
More
|
|
$58.00 - $90.00
from 2 stores
|
|
| Starrett C19 Steel Protractor |
|
Double graduations from 0 - 180 degrees in opposite directions permitting the direct reading of angles and supplementary angles The back of the tool is flat for ease of use The blade can be locked firmly at any angle by the lock nut Satin chrome finish for ease of reading and resistance to rust, Ma ...
More
|
|
$40.00 - $63.00
from 2 stores
|
|
| Starrett Starrett 18 In. Steel Straight Edge |
|
This straight edge is precision ground and nicely finished. It is great for drawing or scribing straight lines and checking surfaces for straightness. The thickness and design permit it to retain shape and accuracy, but still be portable and easy to handle. Tools and Hardware
|
|
$59.00 - $70.00
from 2 stores
|
|
| Starrett Starrett Thickness Gage With Nine Leaves |
|
These gages are used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, and gaging narrow slots. Tools a ...
More
|
|
$23.00 - $27.00
from 2 stores
|
|
| Starrett 120A 6 Dial Caliper 0 To 6 Inch With Case |
|
American-made dial caliper that's handy for mechanics and toolmakers everywhere 1-hand use with the thumb-operated fine adjustment roll Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod; sharp black bar graduations on a no-glare satin finish Knife-edge contacts for inside ...
More
|
|
$116.00 - $126.00
from 2 stores
|
|
| Starrett 57c Surface Gage |
|
No.57 Series , Full-Sized Surface Gages, 12" Spindle Ground bases for accurate reference surfaces V groove in the base for cylindrical work, the front end which allows the spindle to adjust angles A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings Taper ...
More
|
|
$71.00 - $217.00
from 1 store
|
|
| Starrett 657P - MAGNETIC BASE ONLY |
|
No. 657P Magnetic Base. 1 15/16 x 1 5/8 x 1 7/8" (50 x 40 x 48 mm). Push-button on/off switch for one-hand operation. Base has three precision ground, magnetic contact points. Grips horizontally, vertically, and upside down. V-step holds base to arbors, shafts Base has extra 1/4-20 tapped hole on on ...
More
|
|
$93.00 - $104.00
from 2 stores
|
|
| Starrett DH604R-6 - RULE, HOOK 6" |
|
Full-Flexible. Semi-Flexible. Spring-Tempered. Heavy Spring-Tempered. All rules furnished with Starrett satin chrome finish, except where noted. Cases for 6" Rules: furnished at no extra cost in attractive, protective case w/ see-through front. Rounded metal-bound edges prevent pockets from becoming ...
More
|
|
$20.00 - $23.00
from 2 stores
|
|
| Starrett Starrett 12 In. Combination Square |
|
This Starrett combination square consists of a machine divided, hardened, and tempered steel rule on which is mounted an adjustable square head. The square head is made forged and hardened steel with smooth, black enamel finish. Tools and Hardware
|
|
$65.00 - $68.00
from 2 stores
|
|
